Company News

Tianjin Ruide Steel Pipe Manufacturing Co., Ltd.
construction welded pipe,building construction steel pipe,welded structural pipe

Introduction of welding methods for thick walled steel pipes

Date:2025-04-27
The welding method of thick-walled steel pipe should be selected according to the material and wall thickness of the thick-walled steel pipe. Because different welding methods have different arc heat and arc force, they also have different characteristics.
The characteristics of tungsten arc welding are small current density, stable arc combustion, good weld formation, especially suitable for thin plate welding, but thick plate welding will not be selected;
The characteristics of the plasma arc are high arc column temperature, large energy density, good straightness of the plasma arc, its rigidity and flexibility have a wide adjustment range, and the work is stable, but the operation is more complicated;
Submerged arc welding has the characteristics of deep penetration and high wire deposition rate, so the welding speed can be greatly improved, the welding cost is lower, but the labor conditions and environment are relatively poor.
It can be seen that different welding methods have different capabilities and different operating costs. According to the material and wall thickness of thick-walled steel pipes, a reasonable choice of welding method is a very important task to ensure welding quality, increase productivity, and reduce costs.You can obtain more information and introduction about the product by logging on www.rd-steel.com

Recommended

  • building construction steel pipe,welded structural pipe,shs square hollow sections
    Ductile Iron pipes and fittings are increasingly recognized as a preferred material in modern construction and infrastructure projects due to their outstanding performance and long-term benefits
  • api 5l gas welded pipe procurement,construction welded pipe
    Galvanized welded pipes are widely used in construction,transportation,and agriculture,but their zinc coating often wears down quickly under abrasive conditions,This article explores practical methods to enhance their durability,focusing on coating upgrades and base material improvements,
  • construction steel pipe supplier,high-strength piling pipe,api 5l steel pipe piles
    Your Trusted Partner in PPGI, GI Coil & HR Coil Supply Across Southeast Asia!At TIANJIN RUIDE STEEL PIPE MANUFACTURING CO., LTD, we take immense pride in being a leading supplier of high-quality PPGI (Pre-Painted Galvanized Iron), GI Coils (Galvanized Iron Coils), and HR Coils (Hot-Rolled Coils)
  • Zinc Coating Defects in Galvanized Tubes
    Key Causes of Omission Plating in Galvanized Pipes: Grease on base pipe – prevents proper adhesion,leading to uneven coating and black marks,Surface corrosion – residual iron oxides block zinc contact,causing pitting,Heavy stains or grease – difficult to remove,resulting in localized omission plating with smoother edges,Scratches and rough surfaces – contaminants trapped in grooves,causing long,narrow defects (rare),Insufficient galvanizing temperature – leads to leakage issues in the finished pipe,
  • galvanized round pipe
    As a trusted galvanized pipe manufacturer exporter,we supply high-quality galvanized pipes for global infrastructure,municipal and agricultural projects,Currently,the Strait of Hormuz maritime logistics disruptions have caused vessel delays and increased costs for galvanized pipe export to the Middle East,However,we remain optimistic about the global galvanized pipe market prospect,as the global infrastructure boom drives steady demand,We proactively share uncontrollable logistics costs with clients,embodying corporate responsibility and mutual trust,This summary highlights our commitment to partners amid trade uncertainties,emphasizing Middle East galvanized pipe trade,maritime logistics resilience,and our dedication to quality and cooperation,May world peace and smooth global trade prevail,